LEM RX 20 - Technical Specifications; Power Amplifier

10
rx 200
sensitivity
-10 to -50dB
impedance
2.2 kohms
sensitivity
+10 to -30dB
impedance
22 kohms
HIGH
+/-15dB @12kHz
MID
+/-15dB @2.5kHz
LOW
+/-15dB @80Hz
sensitivity
0dB
impedance
22 kohms
HIGH
+/-15dB @12kHz
LOW
+/-15dB @80Hz
MIX output (balanced)
output level
+4dB Unbalanced JACK
AUX send
output level
0dB Unbalanced JACK
AUX return
sensitivity
0dB Unbalanced JACK
IN
0dB
OUT
0dB
minimum impedance
32 ohms
output level
2x150mW
A/D and D/A Converters
DSP resolution
Type of effects
Presets
Controls
IHF output power
Tone burst 10% 20ms
THD max 1%
100 + 100 Watts / 4 Ohms 2 x JACK
Frequency response 20Hz - 20Khz
Hum & Noise -80 dBA
THD < 0.1%
Power supply see label
Weight
kg
5
Dimensions
mm (WxHxD)
257x277x102
MASTER SECTION
STEREO INPUT CHANNELS (5-8)
MONO INPUT CHANNELS (1-4)
EQ
Balanced JACKSTEREO LINE input
16
16-position PRESET selector
PEAK LED
MUTE SWITCH with LED indicator
GENERAL SPECIFICATIONS
POWER AMPLIFIER
24 bit
24 bit
REVERBS, Stereo DELAY, Chorus
REV+DELAY and REV+CHORUS combinations
TAPE RCA phono
HEADPHONES output Stereo JACK
DSP SECTION
RX 200 • TECHNICAL SPECIFICATIONS
MIC input Balanced XLR-F
LINE input Balanced JACK