Need help?Do you have a question about the LEM MX8PFX and is the answer not in the manual?
Connect the mixer to the mains socket, ensuring proper grounding and voltage compatibility.
Handle controls gently, care for cables, avoid extreme environments, and clean with a dry cloth.
Do not open the unit; refer servicing to qualified personnel for any issues.
Balanced XLR connector for microphone signals; avoid line-level equipment.
Balanced JACK connector for line-level signals; do not connect microphones.
Control to regulate the amplification of external signals fed into the channel.
HIGH, MID, and LOW controls for adjusting tonal balance.
Control for the DSP/AUX send level, sending signal to internal DSP and AUX output.
Controls for signal stereo position and channel output level.
RCA input for LINE/PHONO signals and selector for input type.
Control to regulate the amplification of external signals.
Controls for DSP/AUX send level and stereo balance.
Pot for controlling channel level sent to MIX L&R main outputs.
Connectors for auxiliary outputs and inputs, used for external effects.
Pot to control the level of auxiliary stereo input and built-in DSP.
Balanced JACK connectors for the mixer's main line outputs.
Controls for master volume and headphone output.
Controls for headphone level and tape input/output connectors.
Button for tape assignment and LEDs for signal level monitoring.
LEDs indicating mixer power status and +48V phantom power activation.
Mixer power switch, socket, and main fuse holder.
Button for +48V phantom power supply for MIC inputs, requiring balanced XLR cables.
Ground connector for turntables and powered outputs for loudspeakers.
Connect the mixer to the mains socket, ensuring proper grounding and voltage compatibility.
Handle controls gently, care for cables, avoid extreme environments, and clean with a dry cloth.
Do not open the unit; refer servicing to qualified personnel for any issues.
Balanced XLR connector for microphone signals; avoid line-level equipment.
Balanced JACK connector for line-level signals; do not connect microphones.
Control to regulate the amplification of external signals fed into the channel.
HIGH, MID, and LOW controls for adjusting tonal balance.
Control for the DSP/AUX send level, sending signal to internal DSP and AUX output.
Controls for signal stereo position and channel output level.
RCA input for LINE/PHONO signals and selector for input type.
Control to regulate the amplification of external signals.
Controls for DSP/AUX send level and stereo balance.
Pot for controlling channel level sent to MIX L&R main outputs.
Connectors for auxiliary outputs and inputs, used for external effects.
Pot to control the level of auxiliary stereo input and built-in DSP.
Balanced JACK connectors for the mixer's main line outputs.
Controls for master volume and headphone output.
Controls for headphone level and tape input/output connectors.
Button for tape assignment and LEDs for signal level monitoring.
LEDs indicating mixer power status and +48V phantom power activation.
Mixer power switch, socket, and main fuse holder.
Button for +48V phantom power supply for MIC inputs, requiring balanced XLR cables.
Ground connector for turntables and powered outputs for loudspeakers.
General| Brand | LEM |
|---|---|
| Model | MX8PFX |
| Category | Music Mixer |
| Language | English |
To Next Page
