LEM MX8PFX - Technical Specifications

14
Technical specifications
Technical specifications
SECTION LEVELS & DATA CONNECTORS
MONO INPUT CHANNEL
MIC input
sensitivity
from -5 to -55dB XLR-F balanced
LINE inout
sensitivity
-20dB JACK balanced
HIGH
±15dB, @ 1kHz a 12kHz SHELVING
MID
±15dB @ 2.5kHz PEAKING
LOW
±15dB @ 80Hz, SHELVING
STEREO INPUT CHANNEL
STEREO LINE input channel
sensitivity
-20dB
PHONO inout channel
sensitivity
-50dB
MASTER SECTION
output level
+4dB
impedance
1kOhms
output level
+4dB
impedance
1kOhms
FX RETURN
sensitivity
-20dB JACK unbalanced
IN
-20dB
OUT
0dB
minimum impedance
220 Ohms
output level
7V
DSP
A/D converters
bit
18
D/A converters
bit
18
Internal dynamics
bit
24
Sampling frequency
kHz
44.1
PRESETS number 15
Effects
HALL REVERB, ROOM REVERB,
PLATE REVERB, STEREO DELAY
POWER AMPLIFIER
EIA output power
(1 kHz, THD 1%)
50 + 50 Watts / 4 Ohms 2 x JACK
GENERALI SPECIFICATIONS
Frequncy response 20Hz - 20kHz, -3dB
Hum & Noise -80dB
Harmonic distortion (THD) <0.1% @ 1kHz
Power supply see label on the apparatus
Weight
kg
2.9
Dimensions
mm (WxHxD)
270x120x300
JACK stereoHEADPHONES
EQ
MIX output
AUX output
TAPE
RCA phono
JACK balanced
JACK unbalanced
RCA phono