14 of 30 15 of 30
Adjustments to your antenna will be manifested in the received
signal strength displayed.
Note: The division in the signal strength bar indicates the audio
quality threshold – if the signal strength, as indicated by the
solid rectangles, falls below this threshold the audio quality will
deteriorate.
When a channel/frequency is selected M3 also scans for any
DAB stations on the selected frequency and updates the station
list with any new stations found. To listen to any stations found
return to the Now playing screen and select the required station
from the station list as normal.
4.1.4Now playing information
While a station is playing, the screen shows its name and DLS
(Dynamic Label Segment) information broadcast by the station
such as programme name, track title and contact details.
Slideshow
The normal now playing screen shows a thumbnail of the
currently available slideshow image. (If no slideshow image is
available a default DAB thumbnail image is displayed). The
Select button cycles through the following slideshow displays.
Slideshow image and DLS text being broadcast by the current
station.
Full screen version of the slideshow image
Normal now playing screen.
To view further information Press Info .
Each time you press Info , the next set of information is displayed,
cycling through: DLS text, DL Plus information (this is only
displayed if broadcast by the station), programme type, ensemble
name, channel number/frequency, signal strength, power status
To Next Page
Loading...
Need help?
General
