Need help?Do you have a question about the Lemmer L-400 and is the answer not in the manual?
Explains how LEMMER Electric Airless Spray Guns operate with a high pressure piston action pump.
Details personal safety, injection hazards, flammable fluids, ventilation, and respirator use.
Specifies requirements for using extension cords, including gauge and length.
Lists maintenance and usage precautions for the spray gun equipment itself.
Explains the importance of grounding the product for electrical safety.
Instructions on thinning paint, stirring, and straining for optimal spray results.
Guidance on selecting the appropriate nozzle based on paint viscosity and type.
Details the steps for operating the spray gun, including practice, control knob adjustment, and spraying technique.
Step-by-step guide for installing the suction hose for drawing paint from the container.
Procedure for priming the spray gun before use, involving thinners and paint.
Instructions for attaching and using the flexible extension for hard-to-reach areas.
Procedures for cleaning the spray gun using thinners and flushing the pump.
Step-by-step instructions for disassembling the spray gun's pump assembly.
Instructions on reassembling the spray gun pump housing and ensuring proper alignment.
Method to lubricate the spray gun for future use with oil or varsol.
Procedure to rectify a seized piston, typically caused by incomplete cleaning.
Visual guide to identifying wear on round spray nozzles by comparing hole size.
How to identify worn valves by checking priming time.
Advice on returning the spray gun for electrical system issues to a service center.
Details various round spray nozzles for different paint types and viscosities.
Describes flat spray nozzles for accurate spraying with less overspray.
An essential tool for correct paint thinning and nozzle selection.
Hose for drawing paint directly from the original container, improving maneuverability.
Kit containing essential pump assembly parts like cylinder, piston, spring, and valves.
Extension to angle or reach difficult areas for spraying.
General| Model | L-400 |
|---|---|
| Power Source | Electric |
| Max. Pressure | 3000 PSI |
| Type | Airless |
| Nozzle Size | 0.015 - 0.017 in |
To Next Page
