EasyManua.ls Logo

Lemmer DC-3000 User Manual

Lemmer DC-3000
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
WARNING..Read all instructions carefully before assembling components and operating sprayer. Incorrect procedure
could result in damage to the unit, severe personal injury and/or property damage. When spraying flammable materials,
sprayer must be placed at least 20 feet from target in a well-ventilated area. Vapours can be ignited by static discharge or
electrical sparks and result in severe personal injury. LEMMER airless sprayers generate high fluid pressure. Improper
use could result in an injection injury.
OWNER'S MANUAL
DC-3000, DC-4000
VANCOUVER • KELOWNA • CALGARY • EDMONTON • WINNIPEG • TORONTO • MONTRÉAL
DC-4000
cart
DC-3000
DC-4000
stand
Question and Answer IconNeed help?

Do you have a question about the Lemmer DC-3000 and is the answer not in the manual?

Lemmer DC-3000 Specifications

General IconGeneral
BrandLemmer
ModelDC-3000
CategoryPaint Sprayer
LanguageEnglish

Summary

SAFETY PRECAUTIONS

Injection Hazard and Medical Advice

Covers injection risks, first aid, and physician advice.

Material Handling and Fire Safety

Addresses pressure limits, flammable materials, and static discharge.

Operational Safety Guidelines

Details safe practices for spraying, hose use, and tip maintenance.

SHUT DOWN PROCEDURE

Steps for Safe Unit Shutdown

Outlines the sequence for turning off the sprayer safely.

UNIT WARNINGS AND REQUIREMENTS

Thermal Reset and Electrical Specifications

Explains thermal protection and electrical connection requirements.

INTRODUCTION

Product Overview and Features

Introduces the Lemmer sprayer system and its advantages.

PRODUCT SPECIFICATIONS

Technical Specifications Overview

Lists key technical data for the DC-3000 and DC-4000 models.

IMPORTANT NOTICES

Critical Operational and Safety Advisories

Highlights crucial warnings regarding unit restart and pressure.

PUMP COMPONENTS

Key Component Descriptions

Details the spray gun, pressure control box, and motor assemblies.

SETTING UP OF UNIT

Setup Procedure and Tools Needed

Guides on preparing the unit for operation.

Trigger Lock Operation

Explains how to engage and disengage the spray gun trigger lock.

ELECTRONIC CONTROLS (DC-4000)

Control Zones and Operation Modes

Explains the functions of the DC-4000's pressure control knob.

TIP SELECTION

Guide to Choosing Spray Tips and Filters

Provides criteria for selecting the correct spray tip for materials.

ZIP TIP INFORMATION

Zip Tip Operation and Maintenance

Details how to change, use, and clean the Zip Tip.

HOW TO SELECT TIP SIZE AND PROPER FILTER

Selecting Tips Based on Coating and Wear

Offers guidance on choosing tips and filters for various paints.

STARTUP PROCEDURE

Unit Priming and Flushing Steps

Outlines the process for preparing the unit with solvent or paint.

Turning Unit Off

Provides the correct procedure for safely shutting down the unit.

HINTS FOR AIRLESS SPRAYING

Painting Technique and Tip Adjustment

Provides advice on achieving optimal spray patterns and material application.

Spray Painting Method

Explains the correct way to hold and move the spray gun.

HELPFUL HINTS FOR TROUBLE FREE PAINTING

Sprayer, Paint, and Filter Preparation

Offers tips for maintaining the sprayer and preparing materials.

Hose, Electrical, and Extension Cord

Provides guidance on hose selection and electrical connections.

CLEANING INSTRUCTIONS

General Clean-Up and Solvent Flush

Details the procedure for cleaning the sprayer after use.

CLEANING INSTRUCTIONS (Continued)

Storage and Hose Handling Precautions

Covers long-term storage and safe handling of the spray hose.

MAINTENANCE & SERVICE (DC-3000 & DC-4000)

Component Maintenance and Replacement

Covers routine service for guns, tips, motors, and packings.

MAINTENANCE & SERVICE (DC-3000)

Fluid Pump and Packings Service

Details the removal and installation of pump components.

MAINTENANCE & SERVICE (DC-3000) (Continued)

Piston, Foot Valve, and Pump Installation

Covers service for internal pump parts and reassembly.

MAINTENANCE & SERVICE (DC-4000)

Foot Valve and Control Box Service

Explains maintenance for the foot valve and DC-4000 control box.

MAINTENANCE & SERVICE (DC-4000) (Continued)

DC-4000 Packing Kit Installation

Provides instructions for installing the packing kit on the DC-4000.

TROUBLESHOOTING

Common Sprayer Operational Issues

Lists problems and their solutions for starting, pressure, and output.

OTHER QUALITY LEMMER PRODUCTS

Overview of Lemmer Product Lines

Presents a catalog of other spray equipment offered by Lemmer.

ACCESSORIES FOR LEMMER AIRLESS EQUIPMENT

Filters, Tips, Hoses, and Safety Gear

Lists various accessories available for Lemmer airless systems.

L-65 PARTS DIAGRAM & PARTS LIST

L-65 Spray Gun Diagram and Parts

Illustrates and lists components for the L-65 spray gun.

L-65 SPRAY GUN OVERHAUL

Gun Overhaul Procedure and Adjustments

Guides on disassembling, cleaning, and reassembling the L-65 spray gun.

DC-3000 PARTS DIAGRAM

DC-3000 PARTS LIST

DC-4000 PARTS DIAGRAM

DC-4000 PARTS LIST

DC-7000 PARTS DIAGRAM

DC-7000 PARTS LIST

DISTRIBUTION CENTRES ACROSS CANADA

LEMMER PAINT SPRAYING EQUIPMENT LIMITED WARRANTY

Related product manuals