Do you have a question about the Lemon Rx DSMX and is the answer not in the manual?
Procedure to power the receiver for binding, ensuring rapid red LED flashing.
Procedure to activate transmitter for binding using trainer button or menu.
Steps for powering down after successful binding, checking for solid LED indication.
Details of the 6 channel DSM2 receiver connections and pinouts.
Details of the 6 channel Ultra Light receiver connections and connectors.
Details of the 6 channel Micro Light receiver connections and connectors.
Details of the 6 channel DSMX receiver connections and pinouts.
Details of the 7 channel DSMX stabilizer connections and ports.
Details of the 8 and 10 channel receiver connections and features.
Details of the DSMX PPM 8 channel receiver, its connections, and purpose.
Information on using DSMX and DSM2 satellites with receivers.
Instructions for setting 8 and 10 channel receivers to 11mS mode for digital servos.
Default failsafe setting where throttle moves to low on signal loss.
User configurable failsafe positions for all controls.
Failsafe where no pulses are sent to ESC on signal loss.
Procedure to set user-defined failsafe or revert to throttle-only.
Loading...