LENCO CD-500 - CD PLAYER OPERATIONS; Loading, Playing, and Pausing

13
3. Press the or button to highlight “Strong stations only” or “All stations”. Press the ENTER button to
confirm. When the “Strong stations only” is selected, scanning will ignore the noisy stations and only capture the
strong stations. When “All stations” is selected, all possible stations will be captured during scanning even if it is a
bit noisy.
4. The next time doing the scanning the unit will search for the stations based on this scan setting.
CD OPERATION
Loading and Playing CD Disc
Open the CD door. Install a disc with the CD label side facing up. Close the CD door. Press the MODE button to CD
mode. After reading, it will automatically start to play.
Play/Pause Control
To pause playback press the PLAY/PAUSE button. Press the button again to resume playback.
Stop Control
To stop playback press the STOP button.
Skip Track
During playback press the or button to skip to the previous or next track.
High-Speed Music Search
During playback press & hold the or button to start high-speed searching. When you release the or
button normal speed playback will resume.
Repeat Play / Random Play
1. During playback press the PLAY MODE button once, the current track will be played repeatedly.
2. In case of MP3 disc pressing the PLAY MODE button again, all tracks in the current folder will be played
repeatedly.