Selecting The Alarm Mode
Your SmartSet
®
clock radio allows you to select from among three different alarm
operation modes for either alarm. The alarm modes are:
Everyday
the alarm will turn o
n all 7 days.
Weekdays only
the alarm will only turn on Monday through Friday;
Weekends only
the alarm will only turn on Saturday and Sunday;
To check the Alarm Mode setting for Alarm 1, depress the
ALARM 1
setting button.
The
ALARM 1
display will
show the Alarm 1 wake up time and the day of the week
indicators will show you the alarm mode which is selected.
If all 7 indicators are On , the Everyday mode is selected.
If only the Monday through Friday indicators are On , the Weekdays only mode
is selected.
If only the Saturday and Sunday indicators are On , the Weekends only mode is
selected.
To change the Alarm Mode setting for Alarm 1, hold the
ALARM 1
setting button
and press the
ALARM MODE
button until the day indicators show the desired
mode setting, Weekdays only, Weekends only, or Everyday operation.
Release the
ALARM MODE
and
ALARM 1
setting buttons and the display will
return to the correct Day.
Follow the same procedure to select the desired Alarm Mode for Alarm 2 if
necessary.
Chec
king The Wake Up Times And Alarm Mode
Whenever you want to check the wake up time or the alarm mode settings, simply
press either the
ALARM 1
or
ALARM 2
setting buttons. The respective Alarm
display will show the wake up time and the day indicators will sh
ow you the alarm
mode which is currently selected.
Release the
ALARM 1
or
ALARM 2
setting buttons to return to correct Day.
Listening To The Radio
1.) Set the
BAND
selector to the desired band,
AM
or
FM
.
2.) Set the
VOLUME
control to a low setting.
3.) Pr
ess the
RADIO ON/OFF
button to turn the radio On . The radio dial pointer
will light.
4.) Select your desired station with the
TUNING
control.
5.) Adjust the
VOLUME
control to the desired setting.
6.) When you are finished listening, press the
RADIO ON/OF
F
button to turn the
radio Off . The radio dial pointer light goes off.
Antenna Information
AM
The AM bar antenna is inside the cabinet. If AM reception is weak, change
the position of cabinet until the internal antenna picks up the strongest signal.
To Next Page
Loading...
