10
4. Click with the right mouse-button on the speaker icon (taskbar) and select
“recording”. The screen as shown in the example below appears.
5. Click on “microphone USB audio device”.
6. Click on “properties”.
7. Go to the Tab "levels" and move the volume slider down to level 2 as shown in
example below.
8. Go to the tab “advanced” and select in the pull-down menu: “2 channel, 16 bit,
44100 Hz (Cd-Quality)”.
9. Click consecutively on “apply”, “OK” and once again on “OK” (now all programs
are closed).
10. Insert the Audacity software CD into the disk drive, or download new software,
free of charge, via http://audacity.sourceforge.net/.
11. Follow the installation instructions as described in the instruction manual.
12. Run the Audacity software.
To Next Page
Loading...
