What to do if my LENCO LED-2217 has no picture and no sound?
If your LENCO LED TV shows no picture and produces no sound, verify that the TV is properly plugged into a working power outlet, ensure the electrical supply is turned on.
How to fix no sound on LENCO LED-2217 LED TV?
If your LENCO LED TV has no sound, first, press the MUTE button to check if Mute mode is enabled. If not, try switching to another channel to see if the problem persists. You can also press the V+ button to increase the volume and check if this resolves the issue.
What to do if my LENCO LED-2217 has no picture on some channels?
If your LENCO LED TV doesn't show a picture on certain channels, first, ensure that you have selected the correct channel. If the channel is correct, try adjusting the antenna to improve the signal reception.
Crucial guidelines for safe operation and maintenance, including warnings and symbols.
Key instructions on water proximity, cleaning, ventilation, and power cord handling.
Warnings about exposure to rain, moisture, and internal electrical risks.
Information on potential screen image retention (persistent image).
Step-by-step guide for initial TV setup and language selection.
Display during the channel search process for ATS, DTV, and DVBT.
Selecting the active input source (DTV, Satellite, AV, HDMI, etc.).
Configuration for satellite reception, including dish alignment.
Settings for digital cable reception (DVBC).
Options for DVB select type, country, and scan type for auto tuning.
Manual tuning for Analog TV and Cable TV services.
Manual tuning for Digital Terrestrial TV (DVB-T).
Visual indicator for the channel tuning process.
Manual search for satellite channels.
Manual tuning for digital TV channels.
Manual tuning for CADTV channels.
Setting frequency and symbol rate for tuning.
Configuring QAM type and system parameters.
Making fine adjustments for optimal reception.
Accessing the picture settings menu.
Introduction to Personal Video Recorder (PVR) settings.
Viewing, managing, and deleting recorded programs.
Setting timers for automatic program recording.
Managing the list of scheduled recordings.
Setting up the file system for PVR operations (USB disk).
Starting, pausing, and stopping recordings.
Using the timeshift feature to pause and resume live TV.
Controls for playback of recorded or timeshifted content.
Common TV symptoms and their corresponding solutions.
Important note regarding qualified service personnel for repairs.
To Next Page
General