English - 10 -
To Switch the TV On
Standby Programme +/- or a
TV in.
Standby
To power down the TV completely, unplug the
power cord from the mains socket.
Note: When the TV is switched into standby mode, the standby
LED can blink to indicate that features such as Standby Mode
Search, Over Air Download or Timer is active. The LED can
also blink when you switch on the TV from standby mode.
First Time Installation
OK
OK
Store Mode
Home Mode
available in Settings>System>More
OK
Next
OK
About Selecting Broadcast Type
OK
OK
Digital Aerial: If D. Aerial
Digital Cable: If D. Cable
YesOK yNetwork
Frequency Network ID and
Search Step No
OK y Start Frequency Stop
Frequency and Search Step
Next OK
Note: Searching duration will change depending on the
selected Search Step.
Satellite: If Satellite
made. Antenna Type
Antenna TypeDirectSingle Satellite
Cable or DiSEqC switch
OK to
ContinueTransponder
list and
Direct:
OK to
OK
Single Satellite Cable:
OK
OK
DiSEqC switch:
and a DiSEqC switch
OK
OK
Analogue: If Analogue
To Next Page
Loading...
