LENCO LPJ-300 - Page 22

21
Using Projector Menu 1.0
Press button to enter projector menu. Press again to previous status.
Picture Mode
Standard
Use buttons to select an item.
The selected item is displayed in the
upper right of the screen.
Contrast
50
Brightness
50
Color
50
Sharpness
50
Tint
50
Color Temperature
Medium
Aspect Ratio
Auto
Noise Reduction
Middle
Screen
1. Picture Mode
Select Vivid, User (custom), Soft, or Standard
2. Contrast, Brightness, etc.
Set Picture Mode to “User” to adjust these settings. Tint can only be
adjusted in AV and NTSC IN
3. Color Temperature
Select Warm, Cool, or Medium.
4. Aspect Ratio
Select 16:9, 4:3, or Auto
5. Noise Reduction
Select Off, Low, Middle, High or Default
6. Screen
Can only be a adjusted when in VGA mode
Color temper… (temperature)
Customer define
Parameter
red
0-100
blue
0-100
green
0-100
Aspect Ratio
4:3
The signal in a 4:3 aspect ratio projection image.
16:9
The signal in a 16:9 aspect ratio projection image.