EasyManua.ls Logo

LENCO LPJ-500 - User Manual

LENCO LPJ-500
152 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
尺寸：210*145ＭＭ
80克书纸
黑白印刷

Table of Contents

Questions and Answers

  • B
    brandondavisAug 11, 2025
    What to do if my LENCO LPJ-500 shows 'No Signal'?
    • L
      Lisa JohnsonAug 11, 2025
      If your LENCO Projector displays a 'No Signal' message or projects no image, ensure the power light is on. If it's off, verify the projector is plugged into a working mains socket and switched on, then press the power button. Also, check that the lens cover has been removed, the cables are securely attached as per the User Manual, and the correct image source is selected via the Source button on the Control Panel or Remote. Finally, check the Video input signal setting in the Menu section to ensure it's correctly configured.
  • E
    Erika HernandezAug 17, 2025
    Why does the LENCO LPJ-500 lamp turn off?
    • A
      Amanda HendersonAug 17, 2025
      The lamp in your LENCO Projector might be turning off because the projector is overheating. Let it cool down for a few moments. Once cooled, make sure nothing is blocking the ventilation vents and check if the air filter is clean; clean it if necessary. Then, turn the projector back on. If the issue continues, further assistance may be needed.
  • L
    laura10Aug 26, 2025
    Why has the image brightness faded on my LENCO Projector?
    • L
      Linda SimpsonAug 26, 2025
      The image brightness on your LENCO Projector might have faded due to the ambient light in the room. Also, it is possible that you need to replace the lamp (bulb).
  • P
    Phillip CervantesSep 3, 2025
    How to fix a LENCO LPJ-500 image that's wider at the top/bottom?
    • J
      Jared EricksonSep 3, 2025
      If the image from your LENCO Projector appears wider at the top or bottom, it's likely due to the projection angle not being perpendicular to the screen. Correct this by using the projector's built-in keystone function to adjust the image.

LENCO LPJ-500 Specifications

General IconGeneral
Native Resolution800 x 480
Contrast Ratio1500:1
Aspect Ratio16:9
Built-in SpeakersYes
Projection TechnologyLCD
Throw Ratio1.4:1
Weight1.5 kg
Lamp Life30, 000 hours (LED)
ConnectionsHDMI, USB, AV, VGA
Power SupplyAC 100-240V 50/60Hz
Lamp Life (Normal mode)30, 000 hours
Input PortsHDMI, USB, AV, VGA
Supported Resolution1920 x 1080

Related product manuals