LENCO LPJ-500 - To Reduce Image Distortion; Distance between the Projector and Screen

5
Ceiling mounting front:
Select this location
when the projector is
mounted upside down at the ceiling in front
of the screen.
NOTE: A projector mount is required to
mount the projector on the ceiling.
FRONT CEILING
Table mounting rear:
Select this location if you want to place the
projector at the rear of the screen.
NOTE: That a special rear projection screen
is required.
REAR TABLE
Ceiling mounting rear:
Select this location
when the projector is
mounted upside down at the ceiling at the
rear of the screen.
NOTE: That a projector mount and a rear
projection screen is required to mount
the projector on the ceiling.
REAR CEILING
To Reduce Image Distortion
Square/Rectangle
It is recommended to move the projector as close to
center of screen.
Distance Between The Projector And Screen
Measure the distance between the projector and where you want to position the
screen. This is the projection distance and the screen diagonal indicated in cm.
Screen
Projector