Need help?Do you have a question about the LENCO MMC-2900 and is the answer not in the manual?
CD Section| channels | 2 channels |
|---|---|
| signal-to-noise ratio | 60 dB |
| sampling frequency | 44.1 kHz 8 x over sampling |
| quantization | 1 bit DA converter |
| pick up light source | Semi-conductor laser |
| pick up wave length | 790 nm |
Radio Section| tuning ranges | FM 87.5 - 108 MHz |
|---|---|
| antennas | FM wire antenna |
General Specifications| output power | 1.2 W + 1.2 W (RMS) |
|---|---|
| power consumption | 14 W |
| speaker | 3" 8 OHM |
| phones jack | 3.5MM |
| power source | AC: 230V / 50Hz, DC: 4.5V 1.5 x 3 UM3 |
| dimensions | 220 (L) x 160 (D) x 218 (H) mm |
| weight | 1.7 KGS |
Warning about the laser product and its safe handling.
Advice for safe and appropriate operation, placement, and handling.
Identification of all buttons, ports, and indicators on the device.
Connecting to mains power, voltage check, and battery backup for settings.
Turning the unit on/off, switching modes, and adjusting volume.
Step-by-step guide for setting the clock and alarms.
Details on using the snooze function during alarm playback.
Setting the sleep timer and using the CD display function.
Tuning FM stations, adjusting sound, and stereo reception.
Connecting and playing media from USB, SD, and MMC devices.
Playing CDs, pausing, stopping, and skipping tracks.
Searching within tracks and understanding track information displays.
Using repeat, random, and folder playback for various media types.
Steps to create custom playlists for CD and digital media.
Instructions for cleaning the unit, lens, CD, and basic troubleshooting.
Detailed technical data for CD, Radio, and general unit features.
To Next Page
