• Electric
• Fuel efficient
• Oil-free
• Environmentally
friendly
CONGRATULATIONS!
You have just purchased the finest trim tab
system in the world! Welcome to the future.
Lenco trim tabs make the single most important difference
in the way your boat rides and performs. They are optional
on some boats but should be as standard as power trim
and tilt. Lenco trim tabs make your boat ride smoother,
drier, faster and with increased safety whether on a small
skiff or a mega-yacht. Our ball screw design makes
our tabs more reliable and twice as powerful as typical
hydraulic trim tabs. Coupled with any of our trim tab
switches, they also perform with instant response which
makes them more precise and user-friendly.
Our goal is to manufacture products that simply make
boating more enjoyable.
Visit our website: www.lencomarine.com
All Lenco Trim Tab products
are CE certified
Electro-polished solid
316 stainless steel billet
end for Extreme Duty,
Heavy Duty, and High
Performance applications
1. Stronger top cap and
mounting clevis design.
2.
N
ew and improved
pressure-tight torx
screws.
3. Integrated wiper seal
a
t actuator base.
4.
M
olded-in brass
t
hrust bearing design.
5. Thicker and stronger
motor housing wall.
6.
I
mproved O-Ring
design for a more
consistent seal.
7.
Ov
er-molded cable
providing a stronger
tighter seal.
8.
U
pper mounting
bracket w/ gland seal.
6
7
8
5
4
3
3
4
5
7 8
9
6
regnorts si ngised sivelc gnitnuom & pac pot weN -1
and more durable.
etanimile swercs xrot foorp-repmat ,el fiorp wol weN -2
the threaded rod protruding from the actuator cap
providing an improved, pressure-tight seal.
taht senil gnitrap setanimile ngised laes gnir-O weN -3
remained from the molding process allowing for a
more consistant seal under extreme loads.
hsurc sesaercni llaw gnisuoh rotom regnorts ,rekcihT -4
strength by 50% an
d improves symmetry which
strengthens the O-ring seals.
sedivorp gniraeb tsurht ssarb ni-dedlom weN -5
support to the gear train and ball screw creating a
smoother, more stable run cycle which decreases
internal wear.
esab eht ta detnuom laes repiw detargetni weN -6
of the actuator provides greater stability during
operation and also serves as a scraper whereby
eliminating particle entry that could potentially
damage internal seals.
na setaroprocni ngised pac pot dedlom-revo weN -7
o
ver-molded cable feature which eliminates the strain
relief and provides a much more consistent and
stronger seal.
Deutsch Connectors
Environmentally-sealed connectors (thermoplastic housings and silicone
seals) withstand conditions of extreme temperatures and moisture.
Properly wired and mated connections will withstand immersion under 3
feet of water without loss of electronic qualities or leakage.
Lenco 116 Mounting Bracket
with Gland Seal
Gland seal
makes a water-tight
seal between the 116 mounting
bracket and the boats transom.
The gland seal slides over
the actuator wires to seal the
116 mounting bracket to the
transom.
3
4
5
7 8
9
6
regnorts si ngised sivelc gnitnuom & pac pot weN -1
and more durable.
etanimile swercs xrot foorp-repmat ,el fiorp wol weN -2
the threaded rod protruding from the actuator cap
providing an improved, pressure-tight seal.
taht senil gnitrap setanimile ngised laes gnir-O weN -3
remained from the molding process allowing for a
more consistant seal under extreme loads.
hsurc sesaercni llaw gnisuoh rotom regnorts ,rekcihT -4
strength by 50% an
d improves symmetry which
strengthens the O-ring seals.
sedivorp gniraeb tsurht ssarb ni-dedlom weN -5
support to the gear train and ball screw creating a
smoother, more stable run cycle which decreases
internal wear.
esab eht ta detnuom laes repiw detargetni weN -6
of the actuator provides greater stability during
operation and also serves as a scraper whereby
eliminating particle entry that could potentially
damage internal seals.
na setaroprocni ngised pac pot dedlom-revo weN -7
o
ver-molded cable feature which eliminates the strain
relief and provides a much more consistent and
stronger seal.
Deutsch Connectors
Environmentally-sealed connectors (thermoplastic housings and silicone
seals) withstand conditions of extreme temperatures and moisture.
Properly wired and mated connections will withstand immersion under 3
feet of water without loss of electronic qualities or leakage.
Lenco 116 Mounting Bracket
with Gland Seal
Gland seal
makes a water-tight
seal between the 116 mounting
bracket and the boats transom.
The gland seal slides over
the actuator wires to seal the
116 mounting bracket to the
transom.
2 2
LENCO ELECTRIC ACTUATORS
To Next Page
Loading...