507270-03 Page 37 of 60Issue 1917
Figure 54. Evaporator Coil Using a Separate Drain
(Unit shown in horizontal right-hand discharge position)
* Piping from furnace must slope down a minimum of 1/4” per ft. toward trap.
Figure 55. Evaporator Coil Using a Separate Drain Figure 56. Evaporator Coil Using a Common Drain
* Piping from furnace must slope down a minimum of 1/4” per ft. toward trap.
Figure 57. Evaporator Coil Using a Common Drain
(Unit shown in horizontal left-hand discharge position)
To Next Page
Loading...
