Installation Accessories
Description Cat./Part No.
Door Kit (Required - Order Separately)
Black Cast Iron Door for Brentwood™, BWBK H0516
Clean Face Panel Kit
Panel for Clean Face Option (must use gravity kit), BWZF H0518
Outside Air Kit (Required - Included With Fireplace)
Outside Air Coupler to connect outside air UZI to fireplace,
UZIAD
UZIAD
Outside Air Ducting - includes 4” insulated flex x 10’ long,
UZI
UZI
Gravity Kits (REQUIRED WITH CLEAN FACE KIT)
Gravity kit: Complete double duct system includes: 2 elbows
90º, 2 telescopic lengths, 2 grill supports and 2 black grills,
2 fireplace adaptors, 7B30ZK-1
H8947
Gravity Kit Accessories
Elbow 90º, 8” dia., 7B26ZE90 H8948
Elbow 45º, 8” dia., 7B26ZE45 H8949
Telescopic length, 8” dia. (15” to 26”), 7B26ZLA H8950
Adjustable length 8” dia (2” - 5”), 7B26ZL2A H8951
Length two (2) feet, 8KL2 H8954
Length one (1) feet, 8KL1 H8953
Wall radiation shield, 8” I.D., 7B26ZR H8952
OPTIONAL INSTALLATION ACCESSORIES
u
Not tested under EPA certification. If installed, this appliance no
longer qualifies for EPA certification.
Fireplace Kits
Description Cat./Part No.
Blower (heat activated on/off pre-wired), UZY5 UZY5
Blower motor speed control (wall mount), VRUW VRUW
Rigid firescreen BUCEBWZN
Central Forced Air Kit Accessories u
Central Forced Air Kit, Central forced air kit including: blower
(BISZY), flex adaptor (BISAF), 2 clamps, variable speed
control (VRUW), thermo-disk (VTU), fan to flexible pipe
adapter (BISAVF), back draft damper (BISBD), aluminium
tape, BISFWK-1
BISFWK-1
Flexible pipe 5” I.D. x 15 ft. Long, 5FLEX15 5FLEX15
Flexible pipe 5” I.D. x 30 ft. Long, 5FLEX25 5FLEX25
Heating and cooling thermostat, 24V, HCTW HCTW
22
To Next Page
Loading...
