Lennox CLIMATIC 50

19
CLIMATIC™50 – IOM – Rooftops/ Aircoolair
CL50
-
ROOFTOPS
-
IOM
-
Wireless
-
0708
-
E
19
Loc Description Values Min Def lt Max
Loc14
It sets up the visualization to the quarter
pressure of the key multifunction ()
0 BLANK. The field remains empty
1 Setpoint of temperature
2 Temperature
3 Setpoint humidity
4 Relative humidity
5 Clock
6 Timer of sleep 0
6 T. & Hu
0 T. only 6
Loc15
It sets up the visualization to the fifth
pressure of looks at table description
parameters multifunction key
multifunction ()
0 BLANK. The field remains empty
1 Setpoint of temperature
2 Temperature
3 Setpoint humidity
4 Relative humidity
5 Clock
6 Timer of sleep 0 0 6
Loc16
Resistance Automatic from BM50 Off Off On
Loc17
It sets up the allowed modalities in the
system of conditioning through key
MODE Automatic from BM50 0 0 6
Loc18
Modality lock. Several rules except the
keys come block to you to the keys
second up/down Automatic from BM50 0
0 (Keys were
Liber to) 15
Loc19
Set the mode of occupation. It is a
function of the terminal which makes it
possible to send to the supervisor if a
person misses or present. When that a
key is in a hurry the person is present in
the definite state of Occupation for a
definite time. With Not used 0 0 3
Loc20
If qualified limits the variation of the
setpoint of temperature through keys
up/down to a range of +/- 3C° (+/- 6°F).
They In place of visualizing the setpoint
finishes visualizes the degrees to add or
to embezzle to this (from -3C°/-6F° to
+3C°/+6F°)
OFF = Disable function
ON = Enable function Off Off On
Loc21
Factory parameters.
To set up to ON for having the
factory parameters. Off Off On