DC60-DM60-ROOFTOP-IOM-1310-E - 7 -
1.5 Use
1.5.1 Control operating mode.
Only for Flatair and Aqualean ranges.
Press until the desired operating mode is displayed.
Heating mode
Cooling mode
Automatic mode
1.5.2
Fan Speed Management.
Only for Flatair and Aqualean ranges.
Press to select the desired speed (min, med, max) or automatic (Auto).
Minimum speed
Median speed
Maximum speed
Automatic Speed
1.5.3
On/Off unit
By supporting a few seconds, the button you can activate or not (On/Off) the Unit connected.
If the symbol completed by the time is displayed, the Unit is stopped and the 'DC60' in sleep mode.
To restart the unit, press the button a few seconds
If the DC60 is used with the Master/Slaves bus in this case, the 'Off' phase, stops all Rooftop connected on the Bus,
'On' phase restarts all.
To Next Page
Loading...
Need help?
General
