SAFETY/LISTING LABEL
PAGE 25
Catalog # Model Description (Model)
14M78 OA2800-66 Offset adapter, 6” to 6” diameter
14M74 ZCFK-28 Zero Clearance Fireplace Kit
14M75 MFK-28 Masonry Fireplace Kit
70K99 TSPK-B Touch-up spray paint kit, black
12 oz Spray Can
OFFSET ADAPTER
Installations requiring offsets can be handled using an off-
set adapter (it aligns starter pipe with flue).
Actual Appearance
Masonry Fireplace Kit
This header insulation kit is required when installing the insert into
a masonry fireplace with an opening height of 21" to 24". Opening
heights higher than 24" do not require this kit.
Zero Clearance Kit
When installing the 2800HT into a "high dome" or "low profile"
type factory built fireplace (ZC), this kit is required. The kit con-
sists of insulation and components to deflect and dissipate heat.
To Next Page
Loading...
