Page 3
OPTIONAL ACCESSORIES - ORDER SEPARATELY
NOTE - FURNACES CANNOT BE TWINNED!
“B” Width
Models
“C” Width
Models
CABINET ACCESSORIES
Horizontal Suspension Kit - Horizontal only 51W10 51W10
Return Air Base - Upow only 50W98 50W99
High Performance Economizer (Commercial Only) 10U53 10U53
CONDENSATE DRAIN KITS
Condensate Drain Heat Cable 6 ft. 26K68 26K68
24 ft. 26K69 26K69
Heat Cable Tape Fiberglass - 1/2 in. x 66 ft. 36G53 36G53
Crawl Space Vent Drain Kit US 51W18 51W18
Canada 15Z70 15Z70
CONTROLS
Blower Relay Kit (for two-stage outdoor units) 85W66 85W66
FILTER KITS
1
Air Filter and Rack
Kit
Horizontal (end) Size of lter - in. 87L96 - 18 x 25 x 1 87L97 - 20 x 25 x 1
Side Return Single 44J22 44J22
Ten Pack 66K63 66K63
Size of lter - in. 16 x 25 x 1 16 x 25 x 1
SERVICE KIT
Night Service Kit 84W48 84W48
TERMINATION KITS
See Installation Instructions for specic venting information.
Termination Kits -
Direct Vent
Applications Only
Concentric US - 2 in. 71M80 69M29
3 in. - - - 60L46
Canada - 2 in. 44W92 44W92
3 in. - - - 44W93
Flush-Mount US - 2, 2-1/2 or 3 in. 51W11 51W11
Canada - 2, 2-1/2 or 3 in. 51W12 51W12
Wall - Close
Couple
US - 2 in. 22G44 - - -
3 in. 44J40 44J40
Wall - Close
Couple WTK
Canada - 2 in. 30G28 - - -
3 in. 81J20 81J20
Termination Kits -
Direct or Non-Direct
Vent
Roof 2 in. 15F75 15F75
Wall Ring Kit 2 in. 15F74
3
15F74
Roof Termination Flashing Kit - Direct or Non-
Direct Vent (2 ashings)
3 in. 44J41 44J41
1
Cleanable polyurethane frame type lter.
2
Kits contain enough parts for two, non−direct vent installations.
3
Non-direct vent only.
NOTE - Termination Kits (44W92, 44W93, 30G28, 51W12, 51W19, 81J20) and Crawl Space Vent Drain Kit (15Z70) are certied to ULC S636 standard for use in
Canada only.
To Next Page
Loading...
