, ,WARNING
,&,WARNING
-
.
-
-
Keep gas heat section clear and free of combustible
materials, gasoline and other flammable vapors and
liquids,
Inspect return air duct to ensure duct is sealed to the
curb external to the unit,
Inspect physical support of unit to guarantee that it is
sound without sagging, cracks, or gaps around base,
On downflow units, seal between base and support
must also be checked to make sure it is tight,
Do notobstruct air flow around unit, Unit must receive an
unobstructed flow of combustion and ventilating air.
,&,CAUTION
,&WARNING
,&WARNING
,&WARNING
,&IMPORTANT
A,WARNING
FOR YOUR SAFETY READ BEFORE LIGHTING
BEFORE LIGHTING smell all around the furnace area for
gas. Be sure to smell next to the floor because some gas
is heavier than air and will settle on the floor,
Use only your hand to push in or turn the gas control knob.
Never use tools. If the knob will not push in or turn by
hand, do not try to repair it, call a qualified service
technician. Force or attempted repair may result in a fire
or explosion.
,&,WARNING
Page 2
To Next Page
Loading...
Need help?
General