To Next PageTo Next Page
Need help?Do you have a question about the Lennox KGA092 and is the answer not in the manual?
General| Model | KGA092 |
|---|---|
| Refrigerant | R-410A |
| Cooling Capacity | 92000 BTU/hr |
| Cooling Capacity (BTU/hr) | 92000 |
| Energy Efficiency Ratio (EER) | 9.2 |
Specifies required clearances around the unit for safe operation.
Details unit support for downflow discharge installations.
Details unit support for horizontal discharge applications.
Instructions for configuring the condensate drain at the rear of the unit.
Procedure for testing gas piping connections for leaks.
Details on connecting the main power supply to the unit.
Instructions for routing and connecting control wiring.
General steps and checks before applying power to the unit.
Ensures correct rotation and operation of compressors and blowers.
Describes how the blower operates based on thermostat demand.
Instructions for accessing the blower assembly for service.
Procedure to set blower CFM for all modes.
Guides on adjusting belt tension and pulley for optimal performance.
Procedure for checking and adjusting blower belt tension.
Steps for initiating cooling demands and unit operation.
Procedure for checking and adjusting the refrigerant charge.
Steps for initiating gas heat operation and burner ignition.
Explains LED indicators for ignition control troubleshooting.
Describes the sequence of events during heating operation.
Information on factory-set limit controls for safety.
Procedure to set the maximum blower CFM for the inverter.
Adjusts blower speed for energy savings during ventilation.
Adjusts minimum damper position for ventilation air volumes.
Guidelines for checking and replacing unit filters.
Information on motor lubrication requirements.
Instructions for inspecting and cleaning gas burners.
Procedures for cleaning the combustion air inducer.
