To Next PageTo Next Page
Need help?Do you have a question about the Lennox KGB024 and is the answer not in the manual?
General| Tonnage | 2 |
|---|---|
| BTU | 24000 |
| Refrigerant Type | R-410A |
| Operating Voltage | 208/230 V |
| Phase | 1 |
| Sound Level (Outdoor Unit) | 76 dB |
| Cooling Capacity | 24000 BTU/hr |
| SEER Rating | 13 SEER |
Details for downflow discharge installation, including roof mounting.
Guidance for horizontal discharge applications, including clearances.
Details on connecting the electrical power supply to the unit.
Guidance on selecting an optimal location for the room thermostat.
Instructions for routing and connecting thermostat and control wiring.
Steps for initiating blower operation based on thermostat demand.
Procedure to determine CFM for direct drive blowers using static pressure.
Specifications for belt drive kits, including motor and blower choices.
Air resistance values for various options and accessories on specific models.
Air resistance values for options and accessories on the 090 model.
Performance data for the power exhaust fan.
Steps to initiate cooling demands and unit operation.
Ensuring correct compressor and blower rotation for three-phase units.
Function of the freezestat switch to prevent evaporator freeze-up.
Operation of the high pressure switch for system protection.
Role of the high temperature limit switch for compressor protection.
Steps to place the unit in operation and light the burner safely.
Description of the gas valve operation and settings.
Sequence of events during heating demand and ignition.
Interpreting LED status for ignition control diagnostics.
Information on factory-set limit controls for heating operation.
Details on manifold pressures for gas burners.
Cleaning instructions for all-aluminum condenser coils.
Cleaning procedures for fin/tube condenser coils.
