To Next PageTo Next Page
Need help?Do you have a question about the Lennox LGH 060 and is the answer not in the manual?
General| Refrigerant Type | R-410A |
|---|---|
| Phase | 1 |
| Maximum Operating Ambient Temperature (°F) | 115 |
| Minimum Operating Ambient Temperature (°F) | 55 |
| Cooling Capacity | 54, 000 BTU/h |
| SEER Rating | 16 |
| Voltage | 208/230V |
Provides instructions for installing the unit.
Manual for the unit owner.
Details regarding the product warranty.
Steps for initiating and starting up the cooling system.
Steps for initiating and starting up the gas heating system.
Procedure for checking refrigerant charge in all-aluminum coils.
Procedure for checking refrigerant charge in fin/tube coils.
Description of high/low pressure, freezestat, and ambient switches.
Overview of the M2 unit controller features and capabilities.
Instructions for updating unit controller firmware via USB.
Initial steps for starting up the unit controller.
Details on accessing and using service functions like TEST and OFFLINE.
Instructions for configuring unit settings like setpoints and control modes.
Setup and configuration of the economizer damper system.
Step-by-step guide for installing the economizer in downflow applications.
Step-by-step guide for installing the economizer in horizontal applications.
Overview of the LonTalk Module kit and its requirements.
Step-by-step instructions for installing the LonTalk module.
Wiring diagram for connecting the LonTalk module to the unit controller.
Guidance on installing and configuring zone sensors.
Steps to follow when requiring warranty service or parts.
