To Next PageTo Next PageWhat to do if my Lennox MLA030S4M shows an outdoor EEPROM malfunction?
If your Lennox Air Conditioner displays an outdoor EEPROM malfunction, try these steps: * Power off the unit, then restart it after 3 minutes. * If the issue persists, the outdoor main PCB may need to be replaced.
General| Brand | Lennox |
|---|---|
| Model | MLA030S4M |
| Category | Air Conditioner |
| Language | English |
Explains the structure and meaning of outdoor unit model numbers.
Provides detailed specifications for MPA single-zone outdoor units in the 0.75-1.5 ton range.
Details specifications for MPA single-zone outdoor units from 2.0 to 4.0 tons.
Lists specifications for MPB single-zone outdoor units, 0.75 to 1.5 tons.
Provides specifications for MPB single-zone outdoor units in the 2 to 4 ton capacity range.
Outlines specifications for MLA single-zone outdoor units, covering 0.75 to 2 tons.
Details specifications for MPA multi-zone outdoor units, 1.5 to 2.5 tons.
Provides specifications for MPA multi-zone outdoor units from 3 to 4 tons.
Lists specifications for MPB multi-zone outdoor units, 1.5 to 2.5 tons.
Outlines specifications for MPB multi-zone outdoor units, 3 to 4 tons.
Specifies required clearance distances for outdoor unit installation.
Specifies required clearance for M22A, M33A, and M33B indoor units.
Specifies required clearances for MCFA and MCFB indoor units.
Specifies limitations for single-zone refrigerant piping installations.
Details limitations for multi-zone refrigerant piping installations.
Details how to add refrigerant to single-zone systems.
Explains how to add refrigerant to multi-zone systems.
Details how to check the compressor windings resistance.
Explains how to measure the resistance of the IPM module.
Guides on measuring AC fan motor winding resistance.
Provides steps to test the four-way valve by measuring voltage and resistance.
Outlines the procedure for checking the EXV (Electronic Expansion Valve).
