To Next PageTo Next Page
Need help?Do you have a question about the Lennox SGH060 and is the answer not in the manual?
General| Refrigerant Type | R-410A |
|---|---|
| Phase | 1 |
| Cooling Capacity | 60000 BTU/h |
| SEER | 16 |
| SEER Rating | 16 |
| Voltage | 208/230V |
Instructs on connecting gas supply piping to SG units, including sizing and local codes.
Details how to connect the main power supply to the unit, including voltage considerations.
Explains wiring for thermostats, zone sensors, and other control devices.
Lists essential checks before starting the unit's cooling operation.
Details the step-by-step process for starting the cooling system based on unit model.
Highlights the importance of correct voltage phasing for three-phase scroll compressors.
Guides on verifying and adjusting the system's refrigerant charge using operational pressures.
Explains the proper operation of the gas valve for starting and stopping the heating function.
Details the steps involved in the heating cycle, from inducer to flame proving.
Guides on setting gas manifold pressures for two-stage gas valves.
Details the menu path to input design CFM specifications into the Unit Controller.
Details the menu path and options for configuring the economizer based on unit requirements.
Guides on adjusting unit parameter settings using the Unit Controller interface.
Section for documenting initial inspections, including damage checks and electrical connections.
Fields for recording compressor and fan performance data during cooling operation.
