Do you have a question about the Lennox SL280UHV and is the answer not in the manual?
Model | SL280UHV |
---|---|
Type | Gas Furnace |
Efficiency Rating | 80% AFUE |
Blower Type | Variable Speed |
Motor Type | Variable Speed ECM |
Vent Type | Direct Vent |
Fuel Type | Natural Gas |
Stages | Two-Stage |
Warranty | Limited Lifetime Heat Exchanger warranty, 5-Year Limited Warranty on covered components. This product may be eligible for valuable 10-Year Limited Extended Warranty coverage with product registration. |
Lists items included with the furnace package and separately ordered items.
Provides critical safety warnings and precautions for furnace operation.
Details CSA certification and compliance with National Fuel Gas Code.
Specifies required clearances for safe installation and operation.
Guidelines for furnace placement in various locations like garages.
Instructions for installing the furnace with a cooling coil to prevent condensation.
Defines and explains air requirements for unconfined installation spaces.
Defines and explains air requirements for confined installation spaces.
Details installation clearances and considerations for upflow configurations.
Instructions for removing the furnace bottom panel for horizontal installation.
Describes how to connect return air for horizontal installations.
Requirements for the supply air plenum, including access panels.
Guidelines for the return air plenum connection to prevent hazards.
Specific requirements for venting the furnace into a masonry chimney.
Instructions for connecting the gas supply line, including pipe sizing.
Procedures for checking gas piping connections for leaks using leak detection solution.
Precautions to prevent damage from electrostatic discharge to electronic components.
Guidance on selecting and wiring thermostats for the furnace.
Information on setting indoor blower speeds for different modes.
Specifies voltage and frequency requirements for generator use.
Settings for heating operation mode and stage selection based on thermostat type.
Settings for indoor blower speed during cooling operation and adjustments.