To Next Page

To Previous Page

Page 3

OPTIONAL ACCESSORIES - ORDER SEPARATELY

NOTE - FURNACES CANNOT BE TWINNED!

“B” Width Models “C” Width Models

CABINET ACCESSORIES

Downow Combustible Flooring Base 11M60 11M61

CONDENSATE DRAIN KITS

Condensate Drain Heat Cable 6 ft. 26K68 26K68

24 ft. 26K69 26K69

50 ft. 26K70 26K70

Heat Cable Tape Fiberglass - 1/2 in. x 66 ft. 36G53 36G53

Crawl Space Vent Drain Kit USA (Canada) 51W18 (15Z70) 51W18 (15Z70)

CONTROLS

iComfort Wi-Fi

Thermostat 10F81 10F81

Remote Outdoor Air Sensor (for dual fuel and Humiditrol

) X2658 X2658

Discharge Air Temperature Sensor 88K38 88K38

ComfortSense

7000 Thermostat Y0349 Y0349

Remote Outdoor Temperature Sensor

(for dual fuel and Humiditrol)

X2658 X2658

DOWNFLOW FILTER KITS

Downow Air Filter and Rack Kit 51W07 51W08

No. and Size of lter - in. (2) 16 x 20 x 1 (2) 16 x 20 x 1

NIGHT SERVICE KITS

Night Service Kit 10U37 10U37

Universal Service Kit - Switches 89W20 89W20

TERMINATION KITS

Direct Vent Applications Only. See Installation Instructions for specic venting information.

Termination Kits Concentric US - 2 in. 71M80 69M29

3 in. - - - 60L46

Canada - 2 in. 44W92 44W92

3 in. - - - 44W93

Flush-Mount US - 2, 2-1/2 or 3 in. 51W11 51W11

Canada - 2, 2-1/2 or 3 in. 51W12 51W12

Wall - Close

Couple

US - 2 in. 22G44 - - -

3 in. 44J40 44J40

Wall - Close

Couple WTK

Canada - 2 in. 30G28 - - -

3 in. 81J20 81J20

Roof 2 in. 15F75 15F75

Wall Ring Kit 2 in. 15F74 15F74

Roof Termination Flashing Kit (2 ashings) 3 in. 44J41 44J41

VENTING

Left Side Vent Kit 2 or 3 in. 87W73 87W73

Remote Outdoor Sensor may be used with an iComfort™-enabled outdoor unit for a secondary (alternate) sensor reading. Sensor may also be used with a conven-

tional outdoor unit.

Optional for service diagnostics.

Remote Outdoor Temperature Sensor for ComfortSense

7000 Thermostat must be connected directly to the thermostat, Do not connect it to the SureLight

control.

NOTE - The curved exhaust pipe furnished with the Left Side Vent Kit counts as one additional 2 in. diameter 90° elbow. When using 3 in. diameter pipe, the furnished

curved exhaust pipe and eld provided ttings to transition from 2 in. to 3 in. count as 20 feet of equivalent pipe on all units.

NOTE - Termination Kits 44W92, 44W93, 30G28, 51W12, 81J20 and Crawl Space Vent Drain Kit 15Z70 are certied to ULC S636 standard for use in Canada only.

GAS HEAT ACCESSORIES

Input High Altitude

Pressure Switch Kit

Natural Gas to

LPG/Propane Kit

LPG/Propane to

Natural Gas Kit

7501 - 10,000 ft. 0 - 10,000 ft. 0 - 10,000 ft.

All Models 93W75 65W77 70W87