DC Inverter Multi VRF System
24
4.6.3 Engineering Wiring of Power Supply and Communication Cable
(1) Please refer Fig. 28, 29 and 30 for engineering wiring. If there is the hole for cable tie in
wiring route, please fix the wire with cable tie. Connect the power cord and communication
cable to the corresponding terminal board and grounding screw according to the wiring
diagram.
(2) Please be noted that engineering wiring cannot touch the pipe and appliance.
(3) This figure is only applicable for engineering wiring reference of power supply and
communication cable. If there are differences between the figure structure and actual unit,
please refer to the actual unit.
(4) For engineering wiring, please refer to the wiring diagram provided with the unit.
Fig. 28 Engineering Wiring View of
VEP027N432US, VEP034N432US and VEP042N432US
Fig. 29 Engineering Wiring View of
VEP048N432US
To Next Page
Loading...
