Lennox XC16

XC16 - 2 to 5 Ton Heat Pump / Page 23
AHRI SYSTEM MATCHES
NOTE - For the latest up-to-date system matches please visit the AHRI web site at http://www.ahridirectory.org
Model
No.
Capacity SEER EER
Coil or
Air Handler
Furnace
AHRI
Reference
XC16-060-230 + TXV 57,500 14.70 11.20 CX34-50/60C G71MPP-60C-110 1488405
XC16-060-230 + TXV 58,500 15.50 11.40 CX34-60D G61MPV-60D-135 1003924
XC16-060-230 + TXV 58,500 15.00 11.50 CX34-60D O23V5-140/154 1003917
XC16-060-230 + TXV 59,500 15.70 12.00 CX34-60D G60UHV-60D-135 3069550
XC16-060-230 + TXV 58,500 14.20 11.50 CX34-60D 1050276
XC16-060-230 + TXV 58,500 15.50 11.40 CX34-60D G71MPP-60D-135 1489283
XC16-060-230 + TXV 60,000 15.70 12.00 CX34-62C G60UHV-60C-090 1003923
XC16-060-230 + TXV 60,000 15.70 12.00 CX34-62C G60UHV-60C-110 1003922
XC16-060-230 + TXV 59,500 15.50 11.70 CX34-62C G61MPV-60C-090 1003920
XC16-060-230 + TXV 59,500 15.20 11.50 CX34-62C O23V5-140/154 1003913
XC16-060-230 + TXV 59,500 15.50 11.50 CX34-62C G61MPV-60C-091 1046688
XC16-060-230 + TXV 60,000 15.20 11.70 CX34-62C G61MPV-60C-110 3069551
XC16-060-230 + TXV 60,000 15.50 11.70 CX34-62C G61MPV-60C-111 1046689
XC16-060-230 + TXV 59,500 15.50 11.70 CX34-62C G71MPP-60C-090 3094653
XC16-060-230 + TXV 60,000 15.20 11.70 CX34-62C G71MPP-60C-110 3094654
XC16-060-230 + TXV 60,000 14.70 11.70 CX34-62C 1050277
XC16-060-230 + TXV 59,500 15.70 12.00 CX34-62D G61MPV-60D-135 1003915
XC16-060-230 + TXV 59,000 15.20 11.50 CX34-62D O23V5-140/154 1003914
XC16-060-230 + TXV 60,000 16.00 12.00 CX34-62D G60UHV-60D-135 3069555
XC16-060-230 + TXV 59,000 14.50 11.50 CX34-62D 1050278
XC16-060-230 + TXV 59,500 15.70 12.00 CX34-62D G71MPP-60D-135 1489282
NOTES:
+ TXV = Matched with Thermostatic Expansion Valve.
Ratings are certied in accordance with USE certication program which is based on AHRI Standard 210/240; 95°F outdoor air temperature, 80°F db / 67°F wb entering
evaporator air with 25 ft. of connecting refrigerant lines.
All ratings include the use of a blower time delay relay (TDR). All Lennox variable-speed furnaces and Air Handlers have time delay capabilities. Other Furnaces and Air
Handlers may require an optional time delay relay (58M81) for eld installation. See furnace or air handler specications to determine if relay is needed.
Also see TXV Substitutions Table.