What to do if my Lenovo C27q-35 image quality is unacceptable?
If the image quality of your Lenovo monitor is not acceptable, ensure the video signal cable is firmly plugged into both the system and the monitor. You may also want to select another color setting from the OSD menu. Also, perform automatic image setup.
How to fix fuzzy text or blurry image on Lenovo C27q-35 Monitor?
To fix fuzzy lines or a blurry image on your Lenovo monitor, adjust the resolution settings on your system to match the native resolution for this monitor: 2560 x 1440 at 60 Hz. Also, perform automatic image setup. If automatic image setup does not help, perform manual image setup. When working in the native resolution, you may find additional improvements by adjusting the Dots Per Inch (DPI) setting on your system.
How to optimize image when switching Lenovo monitor to dual mode?
To optimize the image when switching your Lenovo monitor to dual mode, use ThinkVision Duo software to optimize the dual screen operation. You can also try adjusting the graphic card resolution manually.
Why is my Lenovo C27q-35 Monitor screen blank but the power indicator is White?
If the power indicator on your Lenovo monitor is white but there's no image, ensure the video cable is properly connected to both your system and the monitor. Also, check the monitor's brightness and contrast settings in the OSD menu and adjust them if they are at the lowest setting.
What to do if my Lenovo Monitor screen is blank and the power indicator is amber?
If your Lenovo monitor screen is blank and the power indicator is steady amber or flashing white, the monitor may be in Standby/Suspend mode. Try pressing any key on the keyboard or moving the mouse to restore operation. You may also need to check the Power options settings on your computer.
What to do if Lenovo C27q-35 says 'Out of Range'?
If your Lenovo monitor displays “Out of Range” and the power indicator is flashing white, the system is set to a display mode not supported by the monitor. If you are replacing an old monitor, reconnect it and adjust the display mode to within the specified range for your new monitor. If using a Windows system, restart the system in safe mode, then select a supported display mode for your computer. If these options do not work, contact the Customer Support Centre.
Why is my Lenovo C27q-35 Monitor power indicator not lit?
If the power indicator on your Lenovo monitor is not lit and there is no image, ensure the power cord is connected properly and the power switch is on. Also, check that the outlet has power. Try using another power cord and electrical outlet. Power on the monitor.
Why does my Lenovo Monitor have discolored pixels?
The appearance of one or more discolored pixels is a characteristic of LCD technology and is not considered a defect. If there are more than five pixels missing, contact the Customer Support Centre.
General| Panel type | VA |
|---|---|
| Color depth | 8 bit |
| Pixel pitch | 0.233 x 0.233 mm |
| Screen shape | Flat |
| Pixel density | 109 ppi |
| Response time | 6 ms |
| Backlight type | W-LED |
| Display diagonal | 27 \ |
| Anti-glare screen | Yes |
| Display technology | LED |
| Native aspect ratio | 16:9 |
| Maximum refresh rate | 60 Hz |
| Response time (fast) | 4 ms |
| NTSC coverage (typical) | 72 % |
| Viewable size, vertical | 335.6 mm |
| Contrast ratio (dynamic) | 3000000:1 |
| Contrast ratio (typical) | 1000:1 |
| Display number of colors | 16.7 million colors |
| Viewable size, horizontal | 596.7 mm |
| Display brightness (typical) | 250 cd/m² |
| Supported graphics resolutions | 2560 x 1440 |
| NVIDIA G-SYNC | - |
| AMD FreeSync type | FreeSync |
| Compatible operating systems | Windows 10, Windows 11 |
| Certification | CCC, RoHS, TÜV Rheinland Eye Comfort, TÜV Rheinland Low Blue Light |
| Product color | Black |
| HDMI version | 1.4 |
| Tilt angle range | -5 - 22 ° |
| Cable lock slot type | Kensington |
| Panel mounting interface | 100 x 100 mm |
| AC input voltage | 90 - 264 V |
| Power supply type | Internal |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 35 W |
| Power consumption (off) | 0.3 W |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 28 W |
| Cables included | AC, HDMI |
| HDMI cable length | 1.8 m |
| Package depth | 179 mm |
| Package width | 717 mm |
| Package height | 453 mm |
| Package weight | 6600 g |
Weight and Dimensions| Bezel width (side) | 1.8 mm |
|---|---|
| Depth (with stand) | 231.2 mm |
| Width (with stand) | 614.1 mm |
| Height (with stand) | 444.4 mm |
| Weight (with stand) | 4700 g |
| Bezel width (bottom) | 28.1 mm |
| Depth (without stand) | 43.7 mm |
| Height (without stand) | 374.5 mm |
| Weight (without stand) | 4100 g |
To Next Page
