Replacing CRUs 38
Replacing the PCI Express card
Attention
Do not open your computer or attempt any repairs before reading the Important
Product Information Guide.
1
Remove the computer cover. For details, see Removing the computer cover.
2
Remove the front bezel. For details, see Replacing the front bezel.
3
Pivot the drive bay assembly outward. For details, see Pivoting the drive bay assembly inward and outward.
4
Replace the PCI Express card.
1 2
Note
If the card is held in place by a retaining latch, press the card retaining latch 1 as
shown to disengage the latch. Grasp the card and gently pull it out of the slot.
5
Reinstall the removed parts. To complete the replacement, see Completing the parts replacement.
To Next Page
Loading...
