Lenovo ThinkServer TD350 70DG - Page 116

•Dependingonthespecifictype,yourAnyRAIDadapterandtheflashmodulemightlookdifferentfrom
theillustrationinthistopic.
Toinstalltheflashmodule,dothefollowing:
1.Removeallexternalmediafromthedrivesandturnoffallattacheddevicesandtheserver.Then,
disconnectallpowercordsfromelectricaloutletsanddisconnectallcablesthatareconnectedto
theserver.
2.Iftheserverisinstalledinarackcabinet,removetheserverfromtherackcabinetandplaceitonaflat,
clean,andstatic-protectivesurface.SeetheRackInstallationInstructionsthatcomeswiththeserver.If
theserverisintowerformfactor,laytheserveronitssideforeasieroperation.
3.Removetheservercover.See“Removingtheservercover”onpage70.
4.LocatetheAnyRAIDadapter.See“Servercomponents”onpage26.
5.Removeanypartsanddisconnectanycablesthatmightimpedeyouroperation.
6.PositiontheflashmoduleabovetheAnyRAIDadapterandalignthetwoholesintheflashmodulewiththe
twopinsontheAnyRAIDadapter.Then,lowertheflashmodulestraightdownuntilitissecurelyseated.
Note:Ifnecessary,removetheAnyRAIDadapterfirstforeasieroperation.See“ReplacingtheAnyRAID
adapter”onpage156
.
Figure58.Installingtheflashmodule
7.Reinstallanypartsandreconnectanycablesthatyouhaveremoved.
Whattodonext:
•Toworkwithanotherpieceofhardware,gototheappropriatesection.
•Tocompletetheinstallation,goto“Completingthepartsreplacement”onpage175.
Removingtheflashmodule
Attention:Donotopenyourserverorattemptanyrepairbeforereadingandunderstanding“Safetyinformation”
onpageiiiand“Guidelines”onpage67.
Beforeyoubegin,printalltherelatedinstructionsorensurethatyoucanviewthePDFversiononanother
computerforreference.
Note:Dependingonthespecifictype,yourAnyRAIDadapterandtheflashmodulemightlookdifferent
fromtheillustrationinthistopic.
102ThinkServerTD350UserGuideandHardwareMaintenanceManual