2.5-inchhot-swap-drivebackplane
Thefollowingillustrationsshowtheconnectorsona2.5-inchhot-swap-drivebackplane.
Figure22.Frontviewofthe2.5-inchhot-swap-drivebackplane
Figure23.Rearviewofthe2.5-inchhot-swap-drivebackplane
0–7Slot0–slot7
Usedtoconnect2.5-inchhot-swapdrives.
810-pinpowerconnector
Usedtoconnectapowercabletoprovidepowertothebackplane.
9AnyRAID-adapterslot
UsedtoconnectanAnyRAIDadapter.
Connectingcables
Thistopicprovidesinstructionsonhowtoconnectcables:
•“Connectingthemini-SAStoPCIesignalcablefromthesystemboardtotheAnyRAIDadapter”on
page41
.
•“ConnectingtheI2CtoI2Csignalcableandmini-SAStoPCIesignalcablesforservermodelssupporting
uptothirty-two2.5-inchdrives”onpage42
.
•“ConnectingtheSATAsignalcablefromthesystemboardtotheLenovoThinkServerRAID110iAnyRAID
Adapter”onpage43.
•“Connectingtheeasy-swap-drivemoduletothesystemboard”onpage43.
Connectingthemini-SAStoPCIesignalcablefromthesystemboardtotheAnyRAID
adapter
ThistopicappliesonlytoservermodelsthatsupportoneofthefollowingAnyRAIDadapters:
•LenovoThinkServerRAID510iAnyRAIDAdapter
Chapter3.Productoverview41