7.Connectthepowerandsignalcable1totherearofthetapedrive.
Figure93.Connectingthepowerandsignalcabletotherearofthetapedrive
8.Dooneofthefollowing:
•Ifyouareinstallingatapedrive,savetheremovedprotectiveshieldincasethatyoulaterremove
thedriveandneedtheprotectiveshieldtocoverthedrivebay.
•Ifyouarereplacingatapedriveandareinstructedtoreturntheoldtapedrive,followallpackaging
instructions.Then,useanypackagingmaterialsthataresuppliedtoyouforshipping.
Whattodonext:
•Toworkwithanotherpieceofhardware,gototheappropriatesection.
•Tocompletetheinstallationorreplacement,goto“Completingthepartsreplacement”onpage175.
Installingorreplacingthemicroprocessor
Thistopiccontainsthefollowingitems:
•“Installingthesecondmicroprocessor”onpage135
•“Replacingthemicroprocessor”onpage139
Installingthesecondmicroprocessor
Attention:Donotopenyourserverorattemptanyrepairbeforereadingandunderstanding“Safetyinformation”
onpageiiiand“Guidelines”onpage67.
Dependingonthemodel,yourservermightcomewithoneortwomicroprocessors.Forservermodelswith
onemicroprocessor,themicroprocessorisinstalledinthemicroprocessorsocket1andthemicroprocessor
socket2isprotectedbyaplasticsocketcover.YoucanpurchaseamicroprocessoroptionkitfromLenovo
andinstallthesecondmicroprocessortoexpandsystemcapabilities.
CAUTION:
Turnofftheserverandwaitseveralminutestolettheservercoolbeforeremovingtheservercover.
Chapter6.Replacinghardware135
To Next Page
Loading...
