Thefollowingillustrationshowsthelocationofthehot-swap-drivebackplane.Toaccessthebackplane,
opentheservercoverandremovetheAnyRAIDadapter.See“Removingtheservercover”onpage70
and
“ReplacingtheAnyRAIDadapter”onpage156.
Notes:
•Dependingonthemodel,yourservermightlookdifferentfromthefollowingillustration.
•Thefollowingillustrationisbasedonservermodelsthathavefifteen3.5-inch-drivebayswithone
backplane1.
Figure19.Backplanelocation
Chapter3.Productoverview39
To Next Page
Loading...
