Lenovo ThinkServer TD350 70DG - Page 89

Toremoveandreinstallthefrontbezel,dothefollowing:
1.Removeallexternalmediafromthedrivesandturnoffallattacheddevicesandtheserver.Then,
disconnectallpowercordsfromelectricaloutletsanddisconnectallcablesthatareconnectedto
theserver.
2.Iftheserverisinstalledinarackcabinet,removetheserverfromtherackcabinetandplaceitonaflat,
clean,andstatic-protectivesurface.SeetheRackInstallationInstructionsthatcomeswiththeserver.
3.Dependingonthemodel,dooneofthefollowing:
•Removetherackhandles.See“Removingandreinstallingtherackhandles”onpage71
.
•Openthefrontdoor,andthenremovethefrontdoorbyliftingitslightlyupwarduntilyoucan
completelyremoveit.
Figure34.Removingthefrontdoor
4.Removetheservercover.See“Removingtheservercover”onpage70.
5.Removealldrives,dummytrays,orprotectiveshields.Seetherelatedtopicsin“Installing,removing,
orreplacinghardware”onpage80
.
Chapter6.Replacinghardware75