4.Removethecoolingshroud.See“Removingthecoolingshroud”onpage73.
5.ToremovethePCIecardholder,pressthereleasetab1andcarefullydisengagethePCIecardholder
fromthechassisatthesametime.
Figure38.RemovingthePCIecardholder
6.BeforeyoureinstallthePCIecardholder,locatethecorrectplaceinthechassisforinstallingtheholder.
YourservercomeswithtwoPCIecardholderandthereisamarkontherearofeachholder.
•InstallthePCIecardholdermarkedwithAtothebracketmarkedwithAinthechassis.
•InstallthePCIecardholdermarkedwithBtothebracketmarkedwithBinthechassis.
7.ToreinstallthePCIecardholder,notetheorientationandthetypeofthePCIecardholder.Alignthe
holesinthePCIecardholderwiththecorrespondingmountingstubsonthechassis.Then,slightly
pressthePCIecardholderuntilitsnapsintoposition.
Figure39.InstallingthePCIecardholder
Chapter6.Replacinghardware79
To Next Page
Loading...
