•Forthe3.5-inchhot-swaphard-disk-drivecage,installthefourscrewstosecurethebackplaneon
thecage.
Figure89.Installingthebackplaneforservermodelswith3.5-inchhard-disk-drivebays
•Forthe2.5-inchhot-swaphard-disk-drivecage,installthesixscrewstosecurethebackplaneon
thecage.
Figure90.Installingthebackplaneforservermodelswith2.5-inchhard-disk-drivebays
Note:Ifyouwanttoinstallthefollowingbackplaneforservermodelswith2.5-inchhard-disk-drive
bays,ensurethatthebackplaneissecuredbythetwotabs1.Then,installthethreescrewsto
securethebackplaneonthecage.
Figure91.Installingthebackplaneforservermodelswith2.5-inchhard-disk-drivebays
Chapter6.Installing,removing,orreplacinghardware135
To Next Page
Loading...
