10.Inserttheconnectorandcableofthenewthermalsensorintothelefthole 1 inthechassis.Thenalign
thetwotabsontheplasticholderholdingthethermalsensorwiththetwoholes
1 and 2 inthechassis,
andpresstheplasticholderuntilitsnapsintoposition.
Figure99.Installingthenewthermalsensor
11.Reconnectthethermalsensorcabletothesystemboard.See“Locatingpartsonthesystemboard”
onpage82.
12.Reinstallthefrontbezel.See“Removingandreinstallingthefrontbezel”onpage120.
Whattodonext:
•Toworkwithanotherpieceofhardware,gototheappropriatesection.
•Tocompletetheinstallationorreplacement,goto“Completingthepartsreplacement”onpage165.
160ThinkStationHardwareMaintenanceManual
To Next Page
Loading...
