Rack installation
The DB620S FC SAN Switch comes standard with the fixed rack mount kit that can be used for 4-post
rack installations. If needed, the DB620S FC SAN Switch can be mounted in a 2-post rack cabinet by
using the optional mid-mount rack kit that is listed in the following table.
Table 10. Rack-mount options
Description
Part
number
Feature
code
Maximum
quantity
supported
Lenovo DB620S Mid-mount Rack Kit 01KN770 AVG7 1
The optional mid-mount rack kit for the DB620S FC SAN Switch is shown in the following figure.
Figure 4. Lenovo DB620S Mid-mount Rack Kit
In addition, in order for the DB620S 32Gb FC SAN Switch to meet FIPS 140-2 Level 2 Physical Security
requirements the tamper-evident seals must be installed (see the following table for ordering information).
Table 11. Tamper-evident security seals
Description
Part
number
Feature
code
Maximum
quantity
supported
Brocade FIPS 140-2 High Security Labels and Seals 01KN785 AVGB 1
Physical specifications
The DB620S FC SAN Switch has the following dimensions and weight (approximate):
Height: 44 mm (1.7 in.)
Width: 440 mm (17.3 in.)
Depth: 356 mm (14.0 in.)
Weight:
Empty: 7.7 kg (17.0 lb)
Fully configured: 8.5 kg (18.8 lb)
Operating environment
To Next Page
Loading...
