3. If the problem still exist, please contact service for further support."
• FQXSPMA2002I: Configuration error for [PhysicalMemoryElementName] on Subsystem
[MemoryElementName] has deasserted.
This message is for the use case when an implementation has detected a Memory DIMM configuration
error has deasserted.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Critical - Memory
SNMP Trap ID: 41
CIM Prefix: PLAT CIM ID: 0127
User Action:
Information only; no action is rquired.
• FQXSPMA2004I: [PhysicalMemoryElementName] Enabled on Subsystem [MemoryElementName].
This message is for the use case when an implementation has detected that Memory has been Enabled.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0130
User Action:
Information only; no action is rquired.
• FQXSPMA2005I: The System [ComputerSystemElementName] has detected a POST Error
deassertion.
This message is for the use case when an implementation has detected that Post Error has deasserted.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Critical - Memory
SNMP Trap ID: 41
CIM Prefix: PLAT CIM ID: 0185
User Action:
Information only; no action is required.
• FQXSPMA2007I: Scrub Failure for [PhysicalMemoryElementName] on Subsystem
[MemoryElementName] has recovered.
This message is for the use case when an implementation has detected a Memory Scrub failure recovery.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Critical - Memory
SNMP Trap ID: 41
CIM Prefix: PLAT CIM ID: 0137
User Action:
Chapter 2. XClarity Controller events 51
To Next Page
Loading...
