Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0022
User Action:
Information only; no action is required
• FQXSPNM4012I: ENET[[arg1]] IP-Cfg:HstName=[arg2], IP@=[arg3] ,NetMsk=[arg4], GW@=[arg5] .
This message is for the use case where a Management Controller IP address and configuration has been
assigned statically using user data.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0023
User Action:
Information only; no action is required
• FQXSPNM4013I: LAN: Ethernet[[arg1]] interface is no longer active.
This message is for the use case where a Management Controller ethernet interface is no longer active.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0024
User Action:
Information only; no action is required
• FQXSPNM4014I: LAN: Ethernet[[arg1]] interface is now active.
This message is for the use case where a Management Controller ethernet interface is now active.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0025
User Action:
Information only; no action is required
• FQXSPNM4015I: DHCP setting changed to [arg1] by user [arg2].
This message is for the use case where a user changes the DHCP setting.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
Chapter 2. XClarity Controller events 57
To Next Page
Loading...
