Table 12. Components on the front of the server
Callout Callout
1 Drive status LED 2 Drive activity LED
3 LCD diagnostics panel assembly 4 LCD diagnostics panel
5 USB 3.2 Gen 1 (5Gbps) connector 6 External LCD connector
7 XClarity Controller USB connector 8 VGA connector (optional)
9 Rack latch (right)
10 Pull-out information tab
11 Drive bays (8) 12 Rack latch (left)
Note: For more information about each component, see “Front components overview” on page 25.
Server model with 16 EDSFF drives (with LCD diagnostics panel assembly)
Table 13. Components on the front of the server
Callout Callout
1 LCD diagnostics panel assembly 2 LCD diagnostics panel
3 USB 3.2 Gen 1 (5Gbps) connector 4 External LCD connector
5 XClarity Controller USB connector 6 VGA connector (optional)
7 Rack latch (right)
8 Pull-out information tab
9 Drive bays (16) 10 Rack latch (left)
Note: For more information about each component, see “Front components overview” on page 25.
Front components overview
Integrated diagnostics panel
The diagnostics panel is integrated in front I/O assembly on some models. For information about the controls
and status LEDs on the diagnostics panel, see “Integrated diagnostics panel” in User Guide or Hardware
Maintenance Guide.
Chapter 2. Server components 25
To Next Page
Loading...
