Figure 15. System-board-assembly switches
1 “Switch 2 (SW2)” on page 39 2 “Switch 7 (SW7)” on page 39 3 “Switch 6 (SW6)” on page 40
SW2 switch block
The following table describes the functions of the SW2 switch block on the system board assembly.
Table 23. SW2 switch block description
Switch-bit number Switch name
Default position Description
1 SW2–1 FPGA reset OFF Forces FPGA into reset
when switched to ON.
2 SW2–2 Force BMC CPU reset OFF Forces BMC and CPU into
reset when switched to ON.
3 SW2–3
Reserved
OFF
Reserved
4 SW2–4 BIOS image swap OFF Enables BIOS image swap
when switched to ON.
SW7 switch block
The following table describes the functions of the SW7 switch block on the system board assembly.
Chapter 2. Server components 39
To Next Page
Loading...
