Acoustics:
Minimum configuration:
Operating: 5.6 bels
Idle: 4.9 bels
Maximum configuration:
Operating: 6.5 bels
Idle: 6.1 bels
Vibration:
Operating: 0.21 G rms at 5 Hz to 500 Hz for 15 minutes across 3 axes
Non-operating: 1.04 G rms at 2 Hz to 200 Hz for 15 minutes across 6 surfaces
Shock:
Operating: 15 G for 3 milliseconds in each direction (positive and negative X, Y, and Z axes)
Non-operating:
12 kg - 22 kg: 50 G for 152 in./sec velocity change across 6 surfaces
23 kg - 31 kg: 35 G for 152 in./sec velocity change across 6 surfaces
The following table lists the maximum system power load, rated inlet current, and system heat output based on
the power supply and source voltage.
Table 47. Rated system power, inlet current, and system heat output
Power supply Source voltage
Maximum power
load per system
(two power supplies)
Rated current
per inlet
System
heat output
550 W AC Platinum 100 - 127 V AC 722 W 6.2 A 2463 BTU/hour
200 - 240 V AC 704 W 3 A 2402 BTU/hour
180 - 300 V DC 702 W 2.5 A 2395 BTU/hour
750W AC Platinum 100 - 127 V AC 984 W 8.4 A 3357 BTU/hour
200 - 240 V AC 958 W 4.1 A 3269 BTU/hour
180 - 300 V DC 958 W 3.5 A 3269 BTU/hour
750W AC Titanium 200 - 240 V AC 949 W 4.1 A 3238 BTU/hour
180 - 300 V DC 948 W 3.5 A 3235 BTU/hour
1100W AC Platinum 100 - 127 V AC 1382 W 12 A 4715 BTU/hour
200 - 240 V AC 1408 W 6 A 4804 BTU/hour
180 - 300 V DC 1408 W 5.1 A 4804 BTU/hour
Warranty services
The SR630 server has a one-year (7X01) or three-year (Machine Type 7X02) customer-replaceable unit (CRU)
and onsite limited (for field-replaceable units [FRUs] only) warranty with standard call center support during
normal business hours and 9x5 Next Business Day Parts Delivered.
Some countries might have different warranty terms and conditions than the standard warranty. This is due to
local business practices or laws in the specific country. Local service teams can assist in explaining country-
specific terms when needed. Examples of country-specific warranty terms are second or longer business day
parts delivery or parts-only base warranty.
If warranty terms and conditions include onsite labor for repair or replacement of parts, Lenovo will dispatch a
service technician to the customer site to perform the replacement. Onsite labor under base warranty is limited to
labor for replacement of parts that have been determined to be field-replaceable units (FRUs). Parts that are
determined to be customer-replaceable units (CRUs) do not include onsite labor under base warranty.
If warranty terms include parts-only base warranty, Lenovo is responsible for delivering only replacement parts
that are under base warranty (including FRUs) that will be sent to a requested location for self-service. Parts-only
service does not include a service technician being dispatched onsite. Parts must be changed at customer’s own
cost and labor and defective parts must be returned following the instructions supplied with the spares parts.
To Next Page
Loading...
