Table 2. Events organized by severity (continued)
Event ID
Message String Severity
FQXSPSE4061I User [arg1] custom privileges set: [arg2][arg3][arg4][arg5][arg6][arg7]
[arg8][arg9] by user [arg10] from [arg11] at IP address [arg12].
Informational
FQXSPSE4062I The system guard snapshot is captured by user [arg1] from [arg2] at
IP address [arg3].
Informational
FQXSPSE4063I The system guard configuration is updated: status=[arg1], hardware
inventory=[arg2] and action=[arg3] by user [arg4] from [arg5] at IP
address [arg6].
Informational
FQXSPSE4064I SNMPv3 engine ID is changed from [arg1] to [arg2] by user [arg3] from
[arg4] at IP address [arg5].
Informational
FQXSPSS4000I Management Controller Test Alert Generated by [arg1]. Informational
FQXSPSS4001I Server General Settings set by user [arg1]: Name=[arg2], Contact=
[arg3], Location=[arg4], Room=[arg5], RackID=[arg6], Rack U-
position=[arg7], Address=[arg8].
Informational
FQXSPSS4002I License key for [arg1] added by user [arg2]. Informational
FQXSPSS4003I License key for [arg1] removed by user [arg2]. Informational
FQXSPSS4004I Test Call Home Generated by user [arg1]. Informational
FQXSPSS4005I Manual Call Home by user [arg1]: [arg2]. Informational
FQXSPSS4006I Call Home to [arg1] failed to complete: [arg2]. Informational
FQXSPSS4007I The BMC functionality tier is changed from [arg1] to [arg2]. Informational
FQXSPSS4008I The [arg1] setting has been changed to [arg2] by user [arg3]. Informational
FQXSPSS4009I System enters LXPM maintenance mode. Informational
FQXSPSS4010I Test Audit Log generated by user [arg1]. Informational
FQXSPTR4000I Management Controller [arg1] clock has been set from NTP server
[arg2].
Informational
FQXSPTR4001I Date and Time set by user [arg1]: Date=[arg2], Time-[arg3], DST Auto-
adjust=[arg4], Timezone=[arg5].
Informational
FQXSPTR4002I Synchronize time setting by user [arg1]: Mode=Sync with NTP Server,
NTPServerHost1=[arg2]:[arg3],NTPServerHost2=[arg4]:[arg5],
NTPServerHost3=[arg6]:[arg7],NTPServerHost4=[arg8]:[arg9],
NTPUpdateFrequency=[arg10].
Informational
FQXSPTR4003I Synchronize time setting by user [arg1]: Mode=Sync with server
clock.
Informational
FQXSPUN0009I Sensor [SensorElementName] has asserted. Informational
FQXSPUN0017I Sensor [SensorElementName] has transitioned to normal state. Informational
FQXSPUN0026I Device [LogicalDeviceElementName] has been added. Informational
FQXSPUN0057I The RAID controller in PCI slot [arg1] does not have a battery. Informational
FQXSPUN2009I Sensor [SensorElementName] has deasserted. Informational
FQXSPUN2012I Sensor [SensorElementName] has deasserted. Informational
FQXSPUN2018I Sensor [SensorElementName] has deasserted the transition from
normal to non-critical state.
Informational
18 ThinkSystem SR650 V2 Messages and Codes Reference
To Next Page
Loading...
